12V microwave sensor HNS112 special design for tri-proof lights by remote control setting
Special design for tri-proof fixtures, and improve the motion sensor stability and anti-interference.
Customized service: logo, model name, parameters like detection range, hold time, outout signal etc.
Features--
| 12V DC input voltage for standard version, 24VDC can be customized |
| Mounting method: ceiling mounting and wall mouting. |
| Dual-processor technology, for built-in daylight sensor |
| 5 years warranty |
Structure and size:
| Permanent ON/OFF function Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.
Settings(Remote control IR12)
press “Auto”, “Reset” or “Ambient learn” to quit this mode. Dim +/-
After desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lockndown the new brightness again.
Sensor mode
Press “Auto” button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.
Reset function
Press “Reset” button, all settings go back to factory default settings.
Factory default settings--
Sensitivity=100%
Daylight sensor=disable
Hold time=90s
Twilight time=5min
Twilight level=10%
|  |
Ambient learn
Press “Ambient learn” button, the latest surrounding lux value overwrites previous lux value learned, and set as the
daylight threshold. This feature enables the fixture to function well in any real application circumstance.
Test 3s
When“twilight level”set at 0%, it becomes ON/OFF control.
“Test mode”is for testing purpose only, for users to check the functionality and choose the desired
detection range. The sensor goes to test mode automatically after pressing this button.
Test mode defaulted settings--
Daylight sensor=disable
Hold time=3s
Twilight time=N/A
Twilight level=N/A
Users can quit this mode by pressing “ON/OFF”, “Reset”, or any button of “Hold time”. The sensor
settings are changed accordingly .
In this mode, after motion detected, sensor enters into a cycle of 3s on and 2s off (0.5s soft off + 1.5s off).
FAQ:
1. who are we?
We are based in Guangdong, China, start from 2016,sell to Domestic Market(50.00%),Northern Europe(10.00%),North
America(10.00%),Western Europe(5.00%),Eastern Europe(5.00%),Oceania(5.00%),Southern Europe(5.00%),South America(5.00%),Eastern
Asia(2.00%),South Asia(1.00%),Mid East(1.00%),Southeast Asia(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
microwave motion sensor,motion sensor,microwave motion sensor module,sensor switch,occupancy sensor
Product Tags:
|
|
IR12 remote control Daylight Monitoring 12V Microwave Sensor 25mA Images
|
